2 - 2014 Hyundai L160LMA CNC lathe
Åskvädersgatan 2, 418 34 Göteborg | Suède
Métallurgie - Tours à CNC
50 000,00 SEK
16 - 2003 Deckel Maho DMU 80T CNC machining center
Rümlang | CH
Offre de départ
Enchère actuelle
Total des enchères
22 500,00 €
0
Enchérir
Offres
Enchérisseur le plus offrant
Surenchéri
Ma dernière enchère: 0,00 € (Enchère automatique)
Partager
Informations sur le produit
| Marque | Deckel Maho |
| Année | 2003 |
| Numéro de série | 11130004663 |
| Quantité | 1 |
| Type | DMU 80T |
Power on hours: 5433
X-Axis Travel: 880 mm
Y-Axis Travel: 630 mm
Z-Axis Travel: 630 mm
Table Dimensions: 1250 mm x 700 mm
Spindle Speed Range: Up to 10,000 rpm
Spindle Motor Power: 25 kW
Tool Taper: SK40 Big plus
Tool Magazine: 1
Number of Tool Positions: 16
Maximum Tool Diameter: 130mm
Maximum Tool Length: 315 mm
Maximum Tool Weight: 8 kg
Tool Magazine: 2
Number of tool positions: 16
Maximum tool diameter: 80mm
Maximum tool length: 315 mm
Maximum tool weight: 8kg
Control System: Heidenhain TNC 530i
Approximate Dimensions (L x W x H): 3950 mm x 2900 mm x 2500 mm
Weight: Approximately 8800 kg
Equipped with: Hofmann RW/NC-220 SK50 4e axis, , Interlit paper filter, Elreha cooler, Martin Wetter oil mist separator, 2x Rotoclear clear glass, documentation
Combinaison
Ce lot fait partie d'une combinaison: Combination 16 & 123-128
Informations supplémentaires
Pickup in October and by appointment only. After the auction a detailed pickup schedule with dates and more information will be shared with all buyers. Due to complex logistics on site a professional service partner has been selected. The Swiss company Bollhalder Industrielogistik AG will be responsible for the proper dismantling and loading of lots onto the transport of the buyer. The costs for this mandatory service are shown per lot as 'Additional costs' and will be added to your bid. Extra services e.g. full service transport to destination can be requested after the auction. Lot numbers above 200 are already properly dismantled by and stored at the company Bollhalder (at which viewing and pickup is only by appointment).
Power on hours: 5433
X-Axis Travel: 880 mm
Y-Axis Travel: 630 mm
Z-Axis Travel: 630 mm
Table Dimensions: 1250 mm x 700 mm
Spindle Speed Range: Up to 10,000 rpm
Spindle Motor Power: 25 kW
Tool Taper: SK40 Big plus
Tool Magazine: 1
Number of Tool Positions: 16
Maximum Tool Diameter: 130mm
Maximum Tool Length: 315 mm
Maximum Tool Weight: 8 kg
Tool Magazine: 2
Number of tool positions: 16
Maximum tool diameter: 80mm
Maximum tool length: 315 mm
Maximum tool weight: 8kg
Control System: Heidenhain TNC 530i
Approximate Dimensions (L x W x H): 3950 mm x 2900 mm x 2500 mm
Weight: Approximately 8800 kg
Equipped with: Hofmann RW/NC-220 SK50 4e axis, , Interlit paper filter, Elreha cooler, Martin Wetter oil mist separator, 2x Rotoclear clear glass, documentation
