2 - 2014 Hyundai L160LMA CNC lathe
Åskvädersgatan 2, 418 34 Göteborg | Svezia
Lavorazione dei metalli - Torni CNC
50.000,00 SEK
12 - 2005 Mazak Integrex 300-III ST CNC mill-turn center
Rümlang | CH
Offerta iniziale
Offerta attuale
Offerta finale
65.000,00 €
0
Offri
Offerte
Maggior offerente
Superato
La mia ultima offerta: 0,00 € (Offerta automatica)
Condividere
Informazioni sul prodotto
| Marchio | Mazak |
| Type | Integrex 300-III |
| Year | 2005 |
| Amount | 1 |
X1/X2-axis travel: 630/230mm
Y-axis travel: 230mm
Z1/Z2-axis travel: 1585/1530mm
W-axis travel: 1530mm
X1/X2/Y/Z1/Z2/W-axis rapid traverse: 38/38/26/38/38/30 m/min
Maximum working length: 1524mm
Maximum working diameter: 760mm
Main spindle speed: 35-4.000 rpm
Sub spindle speed: 35-4.000 rpm
Main/sub spindle bore: 88mm
Main/sub spindle power: 26 kW
Milling spindle speed: 15-12.000 rpm
Milling spindle power: 18,5 kW
Toolholder type: C6
Positions in the toolmagazine: 80
Positions on turret: 9
Control system: Mazatrol 640MT Pro
Equipped with: un-loading magazine, tool pre setter, Mayfran chip conveyor, paper filter, wetter oil mist separator, probe
Combinazione
Questo lotto fa parte di una combinazione: Combination 12 & 99-108 & 140
Informazioni aggiuntive
Pickup in October and by appointment only. After the auction a detailed pickup schedule with dates and more information will be shared with all buyers. Due to complex logistics on site a professional service partner has been selected. The Swiss company Bollhalder Industrielogistik AG will be responsible for the proper dismantling and loading of lots onto the transport of the buyer. The costs for this mandatory service are shown per lot as 'Additional costs' and will be added to your bid. Extra services e.g. full service transport to destination can be requested after the auction. Lot numbers above 200 are already properly dismantled by and stored at the company Bollhalder (at which viewing and pickup is only by appointment).
X1/X2-axis travel: 630/230mm
Y-axis travel: 230mm
Z1/Z2-axis travel: 1585/1530mm
W-axis travel: 1530mm
X1/X2/Y/Z1/Z2/W-axis rapid traverse: 38/38/26/38/38/30 m/min
Maximum working length: 1524mm
Maximum working diameter: 760mm
Main spindle speed: 35-4.000 rpm
Sub spindle speed: 35-4.000 rpm
Main/sub spindle bore: 88mm
Main/sub spindle power: 26 kW
Milling spindle speed: 15-12.000 rpm
Milling spindle power: 18,5 kW
Toolholder type: C6
Positions in the toolmagazine: 80
Positions on turret: 9
Control system: Mazatrol 640MT Pro
Equipped with: un-loading magazine, tool pre setter, Mayfran chip conveyor, paper filter, wetter oil mist separator, probe
