Opent
Verifiëren
Sluit nu!
Gesloten

7 - 2006 KHS Alfill CS 10 Single F28 Single cap sterilization

Bad Zurzach | CH
2 Bod Biedingen Hoogste bod Overboden

Mijn laatste bod: € 0,00 (Automatisch bod)

Delen

Productinformatie

Merk KHS Alfill
Aantal 1
Jaar 2006
Serienummer K-89400 930 800
Type CS 10 Single F28

incl. Gebhardt fan Number: P2M-F&F2C-RRA-RD0; Machine type: SC10 Size of machine, height of activator chamber; SINGLE: caps pass through a vertical rotor; 28: nominal diameter of caps; F: machine sterilizes flat caps; Capacity: 36,300 caps / h; Cap 1 MonoGuard: Diameter: 30.5mm; Height 20.0mm (+/- 0.4mm); Cap 2 ObristCap: Diameter: 30.1mm; Height 19.6mm (+/- 0.4mm);

Combinatie

Dit kavel is onderdeel van een combinatie: KHS aseptic filling line (end of 2021 overhauled)

Aanvullende informatie

All lots on this sale are already dismantled and safely stored by a professional (at re-use level). Contact details of a preferred and professional international service partner (for pickup and loading assistance, fully serviced lot transportation and/or re-installation at destination) will be shared with all buyers immediately after the sale.

incl. Gebhardt fan Number: P2M-F&F2C-RRA-RD0; Machine type: SC10 Size of machine, height of activator chamber; SINGLE: caps pass through a vertical rotor; 28: nominal diameter of caps; F: machine sterilizes flat caps; Capacity: 36,300 caps / h; Cap 1 MonoGuard: Diameter: 30.5mm; Height 20.0mm (+/- 0.4mm); Cap 2 ObristCap: Diameter: 30.1mm; Height 19.6mm (+/- 0.4mm);

Kijkdagen

Maak een afspraak - Neem contact met ons op via Dome Auctions <info@dome-auctions.com>.

Wasenstrasse 1
5330 Bad Zurzach (CH)

Ophaaldagen

Ophalen volgens schema (informatie volgt na veiling)

Wasenstrasse 1
5330 Bad Zurzach (CH)

Ophalen op afspraak

Wasenstrasse 1
5330 Bad Zurzach (CH)

Relevante kavels

  • Overzichtsfoto van 2004 Iemca Kid 70 Bar feeder
    0 Bod Biedingen Hoogste bod Overboden

    10 - 2004 Iemca Kid 70 Bar feeder

    Åskvädersgatan 2, 418 34 Göteborg | Zweden

    Metaalbewerking - Buig- en zetmachines

    SEK 2.000,00

  • Overzichtsfoto van 2012 STAMA MC 726 CNC machining center
    0 Bod Biedingen Hoogste bod Overboden

    8 - 2012 STAMA MC 726 CNC machining center

    Rümlang | Zwitserland

    Combination 8 & 80-87 | Metaalbewerking - CNC-bewerkingscentrum

    € 85.000,00

  • Overzichtsfoto van 2004 Atlas copco FD110 Air dryer
    0 Bod Biedingen Hoogste bod Overboden

    322 - 2004 Atlas copco FD110 Air dryer

    Åskvädersgatan 2, 418 34 Göteborg | Zweden

    Metaalbewerking - Pneumatisch gereedschap

    SEK 500,00