150 - 2011 Polar 137 AT XT Plus Autotrim – wysokiej jakości maszyna do cięcia
Kampenhout | Belgia
2011 Polar Pace 137 ATXT – seria wysokiej jakości maszyn tnących z funkcją Autotrim | Nożyce gilotynowe graficzne
15 500,00 €
Otwarcie za
Weryfikowanie
Zamyka się teraz!
Zamknięta
1005 - Hitachi Seiki CH250 Multi operation lathe
Åskvädersgatan 2, 418 34 Göteborg | SE
0
Oferta
Oferty
Najwyższy oferent
Oferta przebita
Moja ostatnia oferta: 0,00 SEK (oferta automatyczna)
Udostępnij:
Informacje o produkcie
| Marka | Hitachi seiki |
| Rok | 1999 |
| Typ | CH250 |
Maximum Turning Diameter: 500 mm
Maximum Turning Diameter with Live Tooling: 370 mm
Maximum Turning Length: 720 mm
Bar Capacity: 65 mm
Spindle Bore: 65 mm
Maximum Spindle Speed: 4,000 RPM
Milling Spindle Speed: 80–8,000 RPM
Tool Magazine Capacity: 20
Tool Holder Type: KV4540
Control System: Seicos 16T (Fanuc 16iT)
X-Axis Travel: 600 mm
Z-Axis Travel: 1,000 mm
Y-Axis Travel: ±75 mm
B-Axis Travel: 858 mm
C-Axis indexation: 0.001°
X/Z-Axis Rapid Traverse: 30 m/min
Y-Axis Rapid Traverse: 15 m/min
Machine Weight: 8,000 kg
Dimensions (LxWxH): 3,300x1,930x2,290 mm
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 5, 101-102, 107, 268.
Ważne informacje
Pickup days are scheduled for September 30 and October 1, 2 and 3 from 09:00 to 16:00. Buyers will be contacted within 48 hours after the sale closure and will be appointed to 1 of these days (buyers will be spread over 4 days via a schedule for safety on site and crowd control). Contact details of a preferred and professional international service partner (for pickup assistance, dismantling and/or fully serviced lot transportation) will be shared with all buyers immediately after the sale. Lot numbers 1001-1012 are located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg near Stockholm (see closed auctions in Sweden) and including all available machine tools/tooling.
Maximum Turning Diameter: 500 mm
Maximum Turning Diameter with Live Tooling: 370 mm
Maximum Turning Length: 720 mm
Bar Capacity: 65 mm
Spindle Bore: 65 mm
Maximum Spindle Speed: 4,000 RPM
Milling Spindle Speed: 80–8,000 RPM
Tool Magazine Capacity: 20
Tool Holder Type: KV4540
Control System: Seicos 16T (Fanuc 16iT)
X-Axis Travel: 600 mm
Z-Axis Travel: 1,000 mm
Y-Axis Travel: ±75 mm
B-Axis Travel: 858 mm
C-Axis indexation: 0.001°
X/Z-Axis Rapid Traverse: 30 m/min
Y-Axis Rapid Traverse: 15 m/min
Machine Weight: 8,000 kg
Dimensions (LxWxH): 3,300x1,930x2,290 mm
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 5, 101-102, 107, 268.
Odbiór zgodnie z harmonogramem — : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Szwecja)
Odbiór zgodnie z harmonogramem — : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Szwecja)
Odbiór zgodnie z harmonogramem — : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Szwecja)
Powiązane pozycje
-
-
14 - Heidelberg Stitchmaster ST450: wysokiej jakości zszywarka zbiorcza
Kampenhout | Belgia
Heidelberg Stitchmaster ST450 – wysokiej jakości profesjonalna maszyna do zszywania nicią | Zbieranie i wiązanie linek
10 000,00 €
-
3 - 2011 Heidelberg Varimatrix 105 CS – automatyczna maszyna do bigowania i wycinania
Kampenhout | Belgia
Maszyny do bigowania i falcowania
35 000,00 €