805 - Excavadora sobre orugas Komatsu PC138US-11 de 2017
Oostkamp | Bélgica
Excavadoras de orugas
2.500,00 €
Abre
Verificando
¡Ahora cerrando!
Cerrado
1009 - Hitachi Seiki VS40 CNC milling machine
Åskvädersgatan 2, 418 34 Göteborg | SE
2
Pujar
Pujas
Postor más alto
Superado
Mi última puja: 0,00 SEK (Puja automática)
Compartir
Información del producto
| Marca | Hitachi seiki |
| Type | VS40 |
| Year | 1990 |
| Serial number | 40009 |
| Amount | 1 |
Table Size: 850 mm × 550 mm
Maximum Table Load: 350 kg
toolholder size: BT40
Spindle Speed: 120 – 12,000 RPM
Tool magazine Capacity: 30 tools
Control system: SEICOS Σ18M
Equipped with: tooling, 3d measuring probe, FSE chip conveyor, mercatus cooling unit
X-Axis travel: 600 mm
Y-Axis travel: 450 mm
Z-Axis travel: 450 mm
Rapid Traverse X/Y-axis: 40m/min
Rapid Traverse Z-axis: 30m/min
Cutting Feed Rate: up to 15m/min
Machine Dimensions LxWxH: approx. 2300x2400x2680 mm
Machine Weight: approx. 7,300 kg
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 9, 96, 225.
Información importante
Pickup days are scheduled for September 30 and October 1, 2 and 3 from 09:00 to 16:00. Buyers will be contacted within 48 hours after the sale closure and will be appointed to 1 of these days (buyers will be spread over 4 days via a schedule for safety on site and crowd control). Contact details of a preferred and professional international service partner (for pickup assistance, dismantling and/or fully serviced lot transportation) will be shared with all buyers immediately after the sale. Lot numbers 1001-1012 are located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg near Stockholm (see closed auctions in Sweden) and including all available machine tools/tooling.
Table Size: 850 mm × 550 mm
Maximum Table Load: 350 kg
toolholder size: BT40
Spindle Speed: 120 – 12,000 RPM
Tool magazine Capacity: 30 tools
Control system: SEICOS Σ18M
Equipped with: tooling, 3d measuring probe, FSE chip conveyor, mercatus cooling unit
X-Axis travel: 600 mm
Y-Axis travel: 450 mm
Z-Axis travel: 450 mm
Rapid Traverse X/Y-axis: 40m/min
Rapid Traverse Z-axis: 30m/min
Cutting Feed Rate: up to 15m/min
Machine Dimensions LxWxH: approx. 2300x2400x2680 mm
Machine Weight: approx. 7,300 kg
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 9, 96, 225.
Recogida según el horario - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Suecia)
Recogida según el horario - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Suecia)
Recogida según el horario - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Suecia)
Lotes relevantes
-
-
5 - 2002 Kramer Allrad 303-10 wheel loader
Vauderens | Suiza
Combination E | 2002 Kramer Allrad 303-10 Wheel loader with accessories (5, 28 & 29) | Cargadoras de ruedas y palas
6.000,00 CHF
-
23 - 2024 Manitou 1050RT - Cargadora compacta sobre orugas EU STG5 (sin usar)
Depot Deinze | Bélgica
Cargadoras compactas
20.000,00 €
