150 - 2011 Polar 137 AT XT Plus Autotrim : machine de découpe haut de gamme
Kampenhout | Belgique
2011 Polar Pace 137 ATXT : série Autotrim de machines de découpe haut de gamme | Cisailles guillotine graphiques
15 500,00 €
Ouvre
Vérification
Fermeture en cours !
Fermé
1009 - Hitachi Seiki VS40 CNC milling machine
Åskvädersgatan 2, 418 34 Göteborg | SE
2
Enchère
Enchères
Enchérisseur le plus élevé
Surenchéri
Ma dernière enchère: 0,00 SEK (Enchère automatique)
Partager
Informations sur le produit
| Marque | Hitachi seiki |
| Année | 1990 |
| Numéro de série | 40009 |
| Quantité | 1 |
| Type | VS40 |
Table Size: 850 mm × 550 mm
Maximum Table Load: 350 kg
toolholder size: BT40
Spindle Speed: 120 – 12,000 RPM
Tool magazine Capacity: 30 tools
Control system: SEICOS Σ18M
Equipped with: tooling, 3d measuring probe, FSE chip conveyor, mercatus cooling unit
X-Axis travel: 600 mm
Y-Axis travel: 450 mm
Z-Axis travel: 450 mm
Rapid Traverse X/Y-axis: 40m/min
Rapid Traverse Z-axis: 30m/min
Cutting Feed Rate: up to 15m/min
Machine Dimensions LxWxH: approx. 2300x2400x2680 mm
Machine Weight: approx. 7,300 kg
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 9, 96, 225.
Informations importantes
Pickup days are scheduled for September 30 and October 1, 2 and 3 from 09:00 to 16:00. Buyers will be contacted within 48 hours after the sale closure and will be appointed to 1 of these days (buyers will be spread over 4 days via a schedule for safety on site and crowd control). Contact details of a preferred and professional international service partner (for pickup assistance, dismantling and/or fully serviced lot transportation) will be shared with all buyers immediately after the sale. Lot numbers 1001-1012 are located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg near Stockholm (see closed auctions in Sweden) and including all available machine tools/tooling.
Table Size: 850 mm × 550 mm
Maximum Table Load: 350 kg
toolholder size: BT40
Spindle Speed: 120 – 12,000 RPM
Tool magazine Capacity: 30 tools
Control system: SEICOS Σ18M
Equipped with: tooling, 3d measuring probe, FSE chip conveyor, mercatus cooling unit
X-Axis travel: 600 mm
Y-Axis travel: 450 mm
Z-Axis travel: 450 mm
Rapid Traverse X/Y-axis: 40m/min
Rapid Traverse Z-axis: 30m/min
Cutting Feed Rate: up to 15m/min
Machine Dimensions LxWxH: approx. 2300x2400x2680 mm
Machine Weight: approx. 7,300 kg
Attention: lot located at and originating from the bankruptcy of Larsson Finmekaniska in Norsborg (near Stockholm, see closed auctions in Sweden) and including tools/tooling ref. lot numbers 9, 96, 225.
A collecter sur rendez-vous le - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Suède)
A collecter sur rendez-vous le - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Suède)
A collecter sur rendez-vous le - : -
Åskvädersgatan 2
418 34 Åskvädersgatan 2, 418 34 Göteborg (Suède)
Lots concernés
-
-
14 - Heidelberg Stitchmaster ST450 : agrafeuse-collectrice haut de gamme
Kampenhout | Belgique
Heidelberg Stitchmaster ST450 : machine à coudre professionnelle haut de gamme | Rassembler et lier des lignes
10 000,00 €
-
3 - Machine automatique de découpe et de perforation Heidelberg Varimatrix 105 CS de 2011
Kampenhout | Belgique
Machines à plier et à marquer
35 000,00 €